Model | RT-701A |
---|---|
Test method | MFR |
Discharge port diameter | Φ2.095±0.005mm |
Discharge port length | 8.000±0.025mm |
Loaded barrel length | 152±0.1mm |
Melt flow rate meter is used to determine the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination.
For factories and enterprises and research institutes in the production and research.
The machine design and manufacture in accordance with the requirements of GB/T3682-2000
Melt flow rate meter is in the specified temperature conditions, with high-temperature furnace to melt the state of the measured object. The molten state of the measured object, the required weight load by gravity out of a certain diameter hole in the test. Plastics in industrial enterprises and scientific research units of production, often with “melt (mass) flow rate” to represent the polymer material in the molten state of fluidity, viscosity and other physical properties. Melt flow rate refers to the extrudate, the average quality of the sample paragraphs are translated into 10 minutes of extrusion volume. Melt (mass) flow rate expressed by MFR, unit: g / 10 minutes (g / min)
Formula: MFR (θ, mnom) = tref × m / t = 600 × m / t (g/10min)
Where: θ – test temperature
mnom – Nominal Load Kg
m – the average quality of cut g
tref – reference time (10min): 600
t – cut off time interval unit: seconds.
A set of plastic samples, a cut every 30 seconds, the quality of the results section: 0.081 g, 0.086 g, 0.081 grams, 0.089 grams, 0.082 grams.
Cut the average quality m = (0.081 +0.086 +0.081 +0.089 +0.082) ÷ 5 = 0.0838 ≈ 0.084 (g)
Into the formula: MFR = 600 × 0.084/30 = 1.680 (g / 10 min)
Model | RT-701A |
1. Squeeze out some material | |
Discharge port diameter | Φ2.095±0.005mm |
Discharge port length | 8.000±0.025mm |
Loaded barrel diameter | Φ9.550±0.025mm |
Loaded barrel length | 152±0.1mm |
Piston head diameter | 9.475±0.015mm |
Piston head length | 6.350±0.100mm |
2.Standard test load (eight grades) | |
1grade | 0.325kg=(rod + weight + thermal units +1 No. tray body weight) |
2grade | 1.200 kg=(0.325+2 0.875 eight) |
3grade | 2.160 kg=(0.325+3 1.835 eight) |
4grade | 3.800 kg=(0.325+4 3.475 weight) |
5grade | 5.000 kg=(0.325+5 4.675 weight) |
6grade | 10.000 kg=(0.325+5 4.675 weight+6 5.000 weight) |
7grade | 12.500 kg=(0.325+5 4.675 weight+6 5.000+7 2.500 weight) |
8grade | 21.600 kg=(0.325+2 0.875+3 1.835+4 |
RIGHT has helped customers in more than 100 countries to be successful and earn good profits. We also welcome you to become an exclusive distributor in your country.
After signing the agreement, we will not wholesale any more products to your country or region, your orders will be processed and shipped first, and we will execute your custom machine design after you send us the first time. Click the buttons below, and let’s grow your brand together.
No more endlessly wasting time on other lousy suppliers. RIGHT's goal is to let you sit back and relax. We take care of all the dirty works, including trade stuff, clearance and logistics, etc. Our consultant will keep you informed of the trade progress throughout.
We will contact you within 1 working day, please pay attention to the email sales@dgright.com
Automated page speed optimizations for fast site performance