ASTM D5423 Air Ventilation Aging Climatic Test Chamber (RT-326)

Natural Ventilation Heat Aging Test Chamber

The RT-326 Air Ventilation Aging Chamber examines the pre- and post-heating variation characteristics of specimens.
This machine suits wires, leather, plastics, rubber, fabrics, etc. After being uniformly heated at a specified temperature and time while maintaining fresh air inside the box, the aging characteristics of the samples can be determined by observing their resistance to yellowing, cracking, shrinkage, elongation, residual rate, and other properties before and after aging.

Comply standard: UL1581、ASTM-D2436ASTM D5423、CNS3556、CNS742、JIS7212、JISB7757

Product Details:

Air Ventilation Aging Chamber

Temperature Control System

 

1、Power supply: AC380V

2、Power:5.5KW

3、Temperature range: room temperature +25 ℃ ~ 300 ℃

4、Control accuracy: ±0.5℃

5、Analysis accuracy: 0.1℃

6、Distribution error:±2.5℃

7、Heating time: from room temperature to 300 ℃, about 60 minutes.

 

Air Supply Circulation System

 
1. Ventilation rate: 5-20 times per hour or other ventilation rates;
2. Configure power meters for testing with and without ventilation;
3. Ventilation is controlled by adjustable air ducts, manually adjusting the size of the incoming new air for natural ventilation;
4. The exhaust volume adopts a manually adjustable air duct located at the top of the machine (The exhaust needs to be discharged outdoors);
5. Ventilation method: natural intake;
6. The air outlet is located at the top of the machine and adopts a manual switch air outlet.

Machine Structure

Model
RT-326
Inner size(mm)
500(depth) × 450(width) × 500(height) or custom
Machine size(mm)
1100cm (length) × 685cm (width) × 1320cm (height)
Inner box material
SUS # 304 stainless steel
Outer box
baking paint
Insulation material
high-density rock wool
Heater
screw tube heater set

 

Air Ventilation Aging Chamber

Accessory Equipment

 
1. Fuse insurance switch
2. Overload protection
3. Indicator lamps for various actions.
4, A set of rotary disk and rotary motor. (Slewing disk detachable, speed 8~10 rpm)
5. A set of air volume measurement devices. (According to JISK7212 from the power consumption to determine the aging furnace) Air exchange rate of the aging furnace, with digital wattmeter and digital timer.
6. Air volume size adjustment device. Air exchange for 3 times ~ 200 times/hour in RT ~ 250 ℃ adjustable (measured at 80 degrees).
7. Wide-angle projection lighting equipment.
8. With a set of timer: used in the aging time as well as the time of measurement of air exchange.
9. Multi-layer vacuum glass windows.
10. Two test room shelves.
11. Taiwan TAIK original watt-hour meter.
Air Ventilation Aging Chamber

Circuit Control System

 
1. The temperature controller uses a microcomputer electronic setting and digital display (made in Taiwan)
2. The system adopts the PROPORTIONAL + INTERGRAL + DIFFERENTIAL + SCR of the control. This system adopts the control of PROPORTIONAL+INTERGRAL+DIFFERENTIAL+SCR (i.e., Proportional, Integral, Derivative+SCR), which can improve the life and stability of the control element interface.
3. The PID automatic calculation function does not need manual setting.
4. Adoption of high-precision filament sensor.
5. Relay is the Japan OMRON brand.
6. Timer is Japan OMRON brand.
7. The whole machine is tested by 48 48-hour aging test.
8. With phase failure protection and over-temperature alarm.
Air Ventilation Aging Chamber

Start Earning Substantial Profits In Your Country Today!

RIGHT has helped customers in more than 100 countries to be successful and earn good profits. We also welcome you to become an exclusive distributor in your country.

After signing the agreement, we will not wholesale any more products to your country or region, your orders will be processed and shipped first, and we will execute your custom machine design after you send us the first time. Click the buttons below, and let’s grow your brand together.

RIGHT's Services Always Go Extra Mile

No more endlessly wasting time on other lousy suppliers. RIGHT's goal is to let you sit back and relax. We take care of all the dirty works, including trade stuff, clearance and logistics, etc. Our consultant will keep you informed of the trade progress throughout.

ASTM D5423 Air Ventilation Aging Climatic Test Chamber (RT-326)

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email sales@dgright.com

Get In Touch

Fill in the form below and our team will be happy to assist you

Contact Information

904-976-0826 
name@support.com

Opening Hours

Monday – Friday 9am-5pm 
Weekend – Closed

Address

524 Railroad Street, Jacksonville, Florida