RT-214A Digital electro-hydraulic compression testing machine
Introduction:
The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test, can also be used to test the mechanical properties of other materials.
Product Details：
Introduction:
The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test, can also be used to test the mechanical properties of other materials.
Hydraulic System：
The oil tank is sucked through the filter screen and be inhaled pump oil ,through the petroleum pipeline of oil pump transport to oil valve,When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank, when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through and through oil return valve to tank.
Control system:
This machine adopts hydraulic loading, electronic measuring, with a load of figures, the loading rate shows that the maximum load to maintain, as well as overload protection and power data retention and other functions.
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Fixture:
Whole set fixtures include: a set compression platen fixture
Main performance technical specifications:
| Max load (KN) | 100kN (resist
Bend) |
300kN (resist
Bend) |
302kN (resist bend and compress) |
| Test force measuring range (KN) | 4%-100%FS | ||
| Test Force showed the relative error | ≤indicating value±1% | ||
| Test Force Resolution | 0.01kN | ||
| Hydraulic pump rated pressure | 27MPa | ||
| Bearing compress plate size | φ155mm | ||
| Maximum distance between the upper and lower plate | 230mm | ||
| Resist bending roll diameter | φ32mm | ||
| Maximum distance between the upper and lower resist bending rollers | 165mm | ||
| between two bending rollers upon the center distance | 150mm | ||
| between two bending rollers under the center distance | 450mm | ||
| Piston diameter | φ130mm | ||
| Piston stroke | 80mm | ||
| Motor Power | 3 phase 0.75 kW | ||
| Outside dimension mm | 850×620×1340mm | ||
| Net weight | 400Kg | ||
Start Earning Substantial Profits In Your Country Today!
RIGHT has helped customers in more than 100 countries to be successful and earn good profits. We also welcome you to become an exclusive distributor in your country.
After signing the agreement, we will not wholesale any more products to your country or region, your orders will be processed and shipped first, and we will execute your custom machine design after you send us the first time. Click the buttons below, and let’s grow your brand together.
RIGHT's Services Always Go Extra Mile
No more endlessly wasting time on other lousy suppliers. RIGHT's goal is to let you sit back and relax. We take care of all the dirty works, including trade stuff, clearance and logistics, etc. Our consultant will keep you informed of the trade progress throughout.
Related products
-
Mini Hand Arbor Press Machine 2/3/4/5/6/10 Kn (Model RT-226)
-
3-Point and 4-Point Glass Bending Flexural Testing Machine For Phone
-
RT-713 Foam Resilience Dynamic Fatigue Tester, Foam Indentation Hardness Testing Machine
-
RT-212 Touch Screen 2000 KN Concrete Compression Testing Machine
-
RT-225 Concrete Rebound Test Hammer
-
RT-220 Key and Button Life Test Machine
-
RT-205 50KN UTM Universal Material Tensile Testing Machine
-
RT-203B 3 Point /4 Point Glass Bending Testing Machine For Phone