Main functions:

This machine is applied to test all material in tension, compression, bending, shear, peel (90 degrees

and 180 degrees), tear or two extended (need to add extensometer) and others, the material such

as rubber, plastics, synthetic leather, tape, adhesive, plastic film, composite materials, electronics,

metals and other materials, it can judge the product quality from the test.

 

Main feature:

Adopted photoelectric encoder to measure the displacement, the controller uses the embedded

single-chip microcomputer structure with multi-function software, which combined with

measurement, control, calculation and storage. It can automatic calculate the stress, rate of

elongation (need to add with extensometers), tensile strength, elastic modulus, automated

statistical results; automatically recorded the biggest point, breaking point, the designated point

value or the rate of elongation; Using computer to display the dynamic curves in the testing process

and process the data, After testing, it can re-analysis and editing the data by amplifying the curves

through the graphics processing module, printing reports, product performance reached the

international advanced level.

 

 

Corresponding standard :

《GB/T16491-1996 electronic universal testing machine》

 

Applicable industry：

It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging,

printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic

products, colleges and universities; research laboratories; inspection arbitration, technical

supervision departments and many other industries, it is the basic equipment for quality

management and physical tested.

 

Technical parameter:

Model	RT-203A
Max load	200N,500N, 1KN, 2KN
Accurate grade	1 grade /0.5 grade
Effective measuring range	0.2%~100%(1grade) /0.4%~100% (0.5 grade)
Measuring accuracy	the value ±1%/ the value±0.5%
Tester resolution	Max load 1/200000, constant the resolution
Load sensor	Basic configuration: sensor (max load): one Extended configuration: can add more sensors
Effective tensile stroke	800mm;1000mm;1200mm (can be increased the height according to customer’s requirement)
Effective testing width	300mm(can be widened according to customer’s requirement )
Range of testing speed	0.001～500mm/min
Accuracy of displacement measurement	Tolerance: ±0.5%/ tolerance: ±0.2%
safety	Electronic-limit protection
Testing platform moving  device	Fast /slow  two speeds to control, can jog
Return back	Manual or automatic operation. After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection	Overload 10%, automatic protection
fixture	A set of tensile fixture
Machine size	65x36x210cm(length*width*height)（including the height of operative table）
Power system	Panasonic AC Servo Motor + Driver
Power supply	220V, 50HZ
Power	0.4KW (depending on different demand of force, using different motor)
Machine weight	(about) 160 KG
Units	KG,N,LB, TON can be exchanged.

Software features:

1.The software description about Desktop computer type servo tensile testing machine

1. Function of standard modular: provide users with the necessary applications to the test, covering

GB, ASTM, DIN, JIS, BS … and other testing standard specification.

2. Tested product information: provide users with the data to set about the products, one time to

input and re-use permanently. For improving the accuracy, the data can be corrected by the

formula automatically.

3. Dual-Report Editor: provide users with the reported format that users choose (testing program

add EXCEL reported format, Extend the previous single pattern of statements)

4. The data’s unit of length and force can be exchanged, unit of force is T, Kg, N, KN, g, lb, unit of

length is mm, cm, inch.

5. Auto-optimization of graphic scale, display the best measurement of graphics. It can test the

moving exchange in graphics. It has the load – displacement, load – time, displacement – time,

stress – strain load -2 points extending maps, and lots of graph compared.

6. Test results can be output in EXCEL format.

2. testing result can be automatically preserved or manual preserved, after the test, it can

automatically calculate the most strength, up and down yield strength, loop method, best method,

non-proportional extended strength, tensile strength, compressive strength, tensile strength at any

point, constant load extension, elastic modulus, rate of elongation, peel range of maximum force,

minimum force, average force, total energy, bending modulus, x% load in break displacement, load

X% in break displacement, and so on . the test data can be stored in any disk.

1. Software has a capability that can output the before data.
2. The accessories about Desktop computer type servo tensile testing machine
3. warranted book within one-year and operating instructions.
4. a group of fixture
5. testing software for tensile machine.
6. a set of brand computer, color printer

3.Common items: ( display data and calculation )

• Tensile stress ●Tensile strength
• Tensile strength ●Rate of elongation at break
• Fixed stress ●Rate of stress at break
• Stress strength ●Tear strength
• The value of force at any point ●Rate of elongation at any point
• Pull-out strength ●Force of adhesion and the peak of force

 

•