Product Description:

RT-1609 Enameled wire high voltage continuity tester is used to test the lacquer film continuity (i.e., the number of pinholes per unit length of enameled wire specimen) of enameled round wires with conductor nominal diameters of 0.050mm above 1.600mm and below.

Selecting eight test voltages of 350V, 500V, 750V, 1000V, 1500V, 2000V, 2500V and 3000V.

Test specimen length 0 to 99m arbitrary preset.

Meet Standard:

Execution standard: GB/T4074.5-2008 and IEC60851-5:2005;

Inspection standard: JB/T4279.13-2008;

Meet the requirements of GB/T6109-2008 standard;

Technical Parameter:

Features:

1. Test specimen length 0 to 99m arbitrary preset.
2. Adopts single-chip computer control.
3. Automatically complete the test process; LED automatically displays the length of the alignment and the number of pinholes.
4. The driving motor adopts brushless motor, the guide wheel and take-up wheel are equipotential.
5. Electrode insulation to the ground, the use of high-resistance materials, the material does not absorb moisture, no leakage, non-marking, easy to clean, the thickness of its insulation can withstand the role of 3000V long-term continuous voltage.
6. Circuit board anti-static, moisture-proof treatment, and after long-term aging, the quality is more stable, and the instrument is durable.