Product description:
adapted to detect a nominal diameter of 0.020mm 3.000mm above and below enamelled round wire and tape wrapped round wire soften in the hot state after the conductor insulation;
automatic temperature, temperature control, temperature control and display; preheating temperature according to the set, test time, the instrument automatically for pre-heating of the sample, plus load test voltage, meets the test of time or sample breakdown That is when unloading, audible alarm and display test time and temperature, the entire testing process automatically;
Auto forced air cooling fan, so that the second test can be carried out quickly;
heating the mold using brass;

Applied standard:
Implementation of the standards: GB / T4074.6-2008 / IEC 60851-6: 1996;
inspection standards: JB / T4279.8-2008;
meet GB / T6109-2008 standard requirements;

Technical parameter:
Heating the mold size 100 × 100 × 70mm
Two heated mold trough angle 90 °
Between two samples test voltage AC100 ± 10V
Sample breakdown operating current (5 ± 0.5) mA
Short-circuit current between the sample <50mA
Display temperature and the temperature difference between the sample crossing point <2 ℃
Sample warm-up time, test time 0-999s arbitrarily set
Test temperature Room temperature -500 ℃ arbitrarily set, automatic thermostat
Timing device 120s error ± 1sm
Input Power AC220V ± 10% 50HZ
heating power 900W
working environment Temperature: 0 ℃ ~ 40 ℃; Relative humidity: ≤85%
Dimensions L × W × H 540 × 310 × 345mm
weight 32kg: with weights
Weight seat 0.25N × 1, weight Block 1N × 1, weight 0.15N × 1,0.25N × 1,0.45N × 1,1.2N × 1,3.5N × 1,4.5N × 2,17N × 1 , 34N × 1,35N × 1;